615-410-9749Emergency roofing & storm damage repair
Nashville & Middle Tennessee
615-410-9749Request Help
615-431-3789
Roof valley and wall flashing peeled back and bent by wind with exposed nails and sealant gaps.

The Storm Damage Library · Wind Damage

Torn Flashing: What It Is and How It Is Repaired

Metal flashing peeled back or bent by wind, opening the seams where roofs leak most. Call 615-410-9749.

Call us today615-410-9749
Request Help NowSee Before and After

At a Glance

About Torn Flashing

Flashing is the metal that seals the joints of a roof: valleys, chimneys, walls and vents. Wind can peel it back, and once the seam opens, water runs behind the shingles and into the house.

We reset or replace the flashing, seal the seams and check the shingles around it, since flashing leaks are one of the most common sources of storm leaks.

Flashing and Chimneys

Call 615-410-9749

Damage familyWind Damage
Most common onChimneys, valleys, walls and penetrations
What we checkInspect all valleys and walls, Check chimneys and vents, Replace bent or torn metal, Seal seams and test
Why it mattersFlashing leaks are very common

The Damage Sheet

How It Rates

A general guide to how urgent this damage usually is, how fast it spreads, how quick the fix is and how visible it is from the ground.

  • How urgent4 / 5
  • How fast it spreads3 / 5
  • How quick the fix4 / 5
  • How visible from the ground3 / 5

A general guide. Every roof and every storm is different, and we confirm on site.

What we check

  • Inspect all valleys and walls
  • Check chimneys and vents
  • Replace bent or torn metal
  • Seal seams and test

Why It Matters

What Happens If It Waits

  • Flashing leaks are very common
  • Water runs behind the shingles
  • Stains show up away from the leak
  • Sealant alone is a temporary fix
  • A small repair prevents big damage

Where It Shows Up

Where This Is Most Common

Wind damage starts at the edges, ridges and joints, where air gets under the roofing and lifts it or peels metal away.

  • Chimneys and dormers
  • Roof valleys
  • Walls and additions
  • Pipes and skylights

More Damage Types

More Wind Damage

Storm Roof Tool

Repair or Replace Check

Answer a few questions about the roof’s age, the damage and past repairs to see whether repair or replacement is the likelier path.

Open the Tool

Good to Know

Questions About Torn Flashing

Still have a question?

Call 615-410-9749

What does torn flashing look like?

Flashing is the metal that seals the joints of a roof: valleys, chimneys, walls and vents. Wind can peel it back, and once the seam opens, water runs behind the shingles and into the house.

Where does torn flashing show up?

It is especially common on: chimneys and dormers; roof valleys; walls and additions; pipes and skylights.

Can Roof Nashville repair torn flashing?

We remove the damaged flashing, install new metal under and over the shingles, seal the seams with the right materials and water-test the repair. Call 615-410-9749 or send the form to request a quote.

Request a Quote

Tell Us What Happened to the Roof

Tell us what you see, where the water is coming in and add any photos, and we will get back to you quickly with a plan. Prefer to talk? Call 615-410-9749.

Call us today615-410-9749

Request Emergency Help

Roof Nashville is the emergency and storm damage roofing company for Nashville and Middle Tennessee: tarping, board-up, leak repair, hail and wind repair, replacement, gutters and the photos behind every job.

  • 615-410-9749
  • Storm damage and roof leaks
  • Serving Nashville and Middle Tennessee
Service Areas
Copyright © 2026 – Roof Nashville | All Rights Reserved | Terms of Use | Privacy Policy | Cookie Preferences | Website & SEO by Top Search SEO